The one thing you’ve been told about garbage disposal leaks that is wrong is that if you take care of your garbage disposal very well, leaks cannot occur. The truth is that leaks occur over time whether or not the garbage disposal is well taken care of or not. One surprising thing about garbage disposal leaks is that the source of the leak is not usually clear. One common way by which you are likely going to discover that there is a leak is when you intend to try to pick the detergent from the under-sink cabinet and you hand touches a pool of water. Once you discover this pool of water, it is advisable that you know how to determine the source of the leak, where the leak is coming from and what your repair options are before you call the plumber. What Is The Composition Of A Garbage Disposal? Four of the most common areas where leaks can occur are;
The sink flange. This is the conduit between the top of the disposal and the bottom of the sink drain.
The connection of the dishwasher. The dishwasher is connected to the side of the disposal with a rubber hose.
The drain pipe. This is the conduit through which water and food drain into the sewer. It can either be metallic or plastic.
Leak from the garbage disposal itself.
How To Determine The Source Of The Leak Your four best options to determine the sources of the leak are;
Dry the outside of the garbage disposal as well as the sink flange. This is to ensure that any new water will be distinct.
Drain the sink of its water with a stopper
Observe the disposal under your sink for a few minutes. There would be a drip of water from the sink flange provided that the sink flange is the source of the leak.
If there is no drip from the sink flange, disconnect the drain plug from the sink. Then, keep a close eye on the disposal. There should be a drip of water coming from the dishwasher hose, the drain pipe or any other part of the disposal. This should give you the source of the leak and where to fix in order to stop it.
To DIY or not? If you are comfortable with doing plumbing repairs by yourself, then, by all means, use the techniques shared above to do it yourself. A way to get faster results without spinning your head is to call on the services of a licensed plumber once you know what is to be fixed. Visalia’s Best Plumbing is arguably the best plumbing company in the whole of Visalia, California. If the sink flange is the source of the leak, my best advice is for you to tighten the bolts which hold the flank to the sink drain. If the leak persists, put the flange into place by using a layer of plumbers' putty. Here’s a simple 3-step checklist to put the flange into its rightful place;
Loose the bolts such that there is sufficient space between the flanges that will allow the drop of putty to be drained.
When the putty has drained, re-tighten the bolts.
Allow the putty to form a firm seal. This could take a few hours.
After determining that the dishwasher hose is the source of the leak, ascertain whether the leak from the dishwater hose can be attributed to either a loose hose or a cracked hose. If the hose is loose, you can fix it by tightening the clamp of the hose. If the hose is cracked, replace the hose completely in order to fix the leak. If the drain line is the source of the leak, use a wrench to tighten the connection. It is, however, important that to determine if the seal within this connection is still functioning properly. If the seal is broken, remove it and replace it with a new one. The seal may have broken due to age. Should you determine that the disposal itself is the source of the leak, my best advice is for you to replace the disposal completely. Though, a professional can repair it, but this repair will not last long.